The secret to our successful Shower Re-grouting and Repairs

Trent Moreland & Epoxy Grout Pro has unprecedented success within the “Stop leaking shower repair with no tiles removed” industry as a direct result of using our engineered waterproofing system in combination with our systematic approach, process and purpose engineered diamond burs.

These diamond burs ensure a mechanical interlocking interface. We do not rely on surface adhesion.

Our EGS epoxy grout product is a chemical epoxy derivative, two-part compound sealant which fills the gaps between the floor and the wall even if further expansion should occur in main movement areas. The application is in form of a 5mm coving.

Engineered Diamond Burs manufactured to our design, spec and grit requirements.

Our EGS product has been specifically designed for wet area sealing and has the strength to withstand normal building movement. It will not crack, deteriorate or let water penetrate through the junctions.

The product will be colour matched to the colour of the shower as closely as possible to give a neat appearance.

It makes cleaning easier as the viscosity of the seal prevents dirt/mould build-up and is highly resistant to water, grease, scouring or use of abrasive cleaners.
Epoxy Grout Waterproofing Solution – Engineered Adhesive
Our 2-part epoxy adhesives are suitable for bonding a wide variety of materials. Available with a range of different cure speeds to suit, our epoxies have been developed to offer a high standard of performance for demanding bonding applications.


EGS 2-part epoxy adhesives will bond most engineering materials. They form excellent structural bonds to a wide variety of materials including ceramic tile, marble, limestone, granite and most natural and processed materials used within wet areas of today’s buildings.


Their excellent chemical and water resistance makes them suitable for harsh environmental conditions. These epoxies are an excellent choice for high-strength structural bonding.


Epoxies are widely used in the construction industries. Applications are diverse and include bonding, sealing and waterproofing joints to shower recesses, shower baths, vanity tops, kitchen counter tops, ceramic and natural tile joints and junctions.


EGS epoxy is a 1:1 mix epoxy which can be easily dispensed with a static mixing nozzle. No measuring or hand mixing is needed. Heat cure is not needed as the adhesives will cure at room temperature.

Joint design

The high shear and peel strength of the bonds, coupled with the increased stress distribution of adhesives, greatly expands joint design possibilities.